Modular system ECOFILM

The system consists of both MH (Module Heating) heating modules fitted with ECOFILM foil and non-heating MB (Module Blank) modules. The non-heating modules are used to fill unheated parts and can be shortened and/or trimmed, unlike the heating modules. The modules are laid on the CD profiles of plasterboard and gypsum fibreboard ceilings. The supply cables of the heating modules, which are fitted with a plug, are simply connected to the backbone distribution system.

The backbone cable consists of a connecting cable on which double sockets are placed at regular distances of 1.2 m from one another for the connection of heating modules. Two ECOFILM MH heating modules can be connected to each double socket – the backbone cable for 4 modules thus has two double sockets, while there are three sockets for 6 modules, five sockets for 10 modules, etc. It is possible to have just one backbone cable in a room, but there can also be two or even more – depending on the number and distribution of the heating modules.

MH heating modules, like Ecofilm ceiling foils, must be covered by PE or PVC foil-min. thickness 0.2 mm (it functions as a second layer of electrical insulation). The user must place the foil under the plasterboard/gypsum fibre boards. Connection to the electrical wiring system may only be carried out by a qualified person. Any shortening is always done from the supply cable side-the original ending after the last double socket must be retained. The backbone cable is designed exlusively for the connection of Ecofilm MH heating modules.