A basic range of convectors, fitted with a thermostat featuring three preset modes (Comfort, Eco, Timer) and a weekly programme. The convector heater also features an ‘Open Window’ function, a control lock and temperature sensor calibration.
Convector heater with a programmable thermostat (accuracy 0.1°C) and four operating modes:
COMFORT – the convector continuously maintains the temperature set on the thermostat; user intervention is required to change the temperature. COMFORT mode is intended primarily for applications where a master regulation system is installed (room thermostats, central control).
ECO – the convector continuously maintains a reduced temperature; the value can be set within a range from 6°C to a temperature 1°C lower than that set in COMFORT mode.
PROG – for automatic switching between COMFORT and ECO modes. For each day of the week, you can select one of six preset programmes. One of these programmes can be customised to suit your needs; a COMFORT or ECO temperature can be assigned to each hour of the day.
TIMER – for setting the convector to switch off automatically. The switch-off time can be set from 1 to 8 hours.
Additional functions: temperature calibration ±3 °C / control lock / open-window detection. This type of heater is primarily intended for permanent installation in a junction box. The connection cable is fitted with a plug (intended for export markets); the plug is removed during installation (this does not invalidate the warranty).
This product is an electric local heater falling within the scope of Regulation (EU) 2024/1103. The EcoDesign graphic symbol is an active link to the mandatory information and conditions for its installation.
