The thermostat can be switched between four operating modes:
FROST-FREE – the convector maintains a frost-free temperature of ±7 °C in the room
COMFORT – the convector continuously maintains a comfortable temperature (adjustable in 0.5 °C increments within the range 8–30 °C). User intervention is required to change the temperature or mode
ECO – the convector continuously maintains a reduced-power temperature (adjustable in 0.5 °C increments within the range 7–29 °C). User intervention is required to change the temperature or mode. The ECO temperature must always be at least 1 °C lower than the COMFORT temperature. If you set the COMFORT temperature to, for example, 17 °C, the ECO temperature cannot be set to a value higher than 16 °C
PROGRAMME – the convector will automatically switch between COMFORT and ECO modes according to the set programme. There are 5 preset programmes (P1–P5) and 3 editable programmes (P6–P8). Any of the programmes P1–P8 can then be assigned to individual days of the week.
In PROGRAMME mode, the switch between ECO and COMFORT temperatures always takes place on the hour (for both preset and editable programmes). When creating programmes P6–P8, the default setting is 24 hours in ECO mode, into which a maximum of 3 blocks (time intervals) of COMFORT mode can be inserted. If the convector is to be regulated by a master control system (room thermostat, central control, SMART HOME systems), switch it to COMFORT mode and set the maximum temperature to 30 °C. The heater is fitted with a tip-over safety switch; with the addition of plastic supports (optional accessories), it can also be used as a portable heater.
This product is an electric local heater falling within the scope of Regulation (EU) 2024/1103. The EcoDesign graphic symbol is an active link to the mandatory information and conditions for its installation.
